 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (2)
- (1)
- (3)
- (1)
- (1)
- (2)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
Non-continuous PU Foam Hot Press Machine
|
| Supply Ability: |
1 |
| Related proudcts |
pu plate, pu foam panel, |
| Specifications |
2500 |
| Price Term: |
FOB |
| Port of loading: |
Shanghai |
| Minimum Order |
1 |
| Unit Price: |
Negotation |
|
This non-continuous single layer/two directions hot press machine is mainly for producing sandwich panels and cold room doors . It have 2/4 molds ,one/two is making and another mold is preparing .
This machine are consists of gantry frame , bed , down moving molds , up fixed mold , rail , machine bed , electric control ,hydraulic system and hotting system .
Operating Steps:
1. The initial state of the equipment: press the press is completed, the host back to stop in the horizontal position, the activities of the falling beam in the lowest position.
2. The first piece of the table board to the right side of the press will have been cured products removed from the press, remove the cooked products are good.On the template pre-installed color plate, will have been pre-installed under the blank plate into the host board.
3. Clamping (to complete the pressure on the product plane): start the hydraulic station operation clamping, lifting the activities of the beam in the bottom of the cylinder group under the action of upward movement, driving the work platform together to move up to reach the position, the hydraulic station pressure Rise to the pre***ermined pressure automatically stop rising and locking, press the press into the standby state.
4. Tilt: start tilt button, the entire press began to slowly tilt to reach the set position, the tilt stopped.
5. Open the water valve, hot water into the hot plate circulation on the hot plate heating. The suction fan is attached to the upper platen working surface. The injection molding machine is injected into the cavity between the upper and lower platens. At this point the foam can start the aging time function, the equipment into the automatic pressure aging time. The time setting is to meet the foaming (or bonding) process requirements. The pressure setting is ***ermined according to the process requirements.
6. Tilt reset (in the foam state): After the completion of the foam, start the reset button, the press began to slowly reset, cl |
| Company: |
wuxi luole machinery equipment co.,ltd
|
| Contact: |
Mr. Levi Wang |
| Address: |
Wuxi City Donggan Town |
| Postcode: |
214100 |
| Tel: |
0086 510 83594436 |
| Fax: |
0086 510 83594436 |
| E-mail: |
|
|
|
Home
